How to handle JSON decode error in Python script with try and except

Written by Claudio Kuenzler - 1 comments

Published on February 20th 2024 - Listed in Coding Python

---

The following Python code is supposed to handle JSON , stored in the "output" variable:

data = json.loads(output)

However when the "output" does not contain a valid JSON format (e.g. empty, broken syntax, etc.) the following error is raised:

Traceback (most recent call last):
File "/home/ck/Git/python_script/python_script.py", line 99, in <module>
data = json.loads(output)
File "/usr/lib/python3.10/json/__init__.py", line 346, in loads
return _default_decoder.decode(s)
File "/usr/lib/python3.10/json/decoder.py", line 337, in decode
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
File "/usr/lib/python3.10/json/decoder.py", line 355, in raw_decode
raise JSONDecodeError("Expecting value", s, err.value) from None
json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0)

So we see the json.decoder throwing a JSONDecodeError.

Catching errors with try + except

A common way in Python scripts is to use try + except to catch errors . The "try" part runs the code you want to run, in this case the json.loads line. The "except" part handles a potential error of the try part.

Let's use the JSONDecodeError seen in the previous output:

try:
data = json.loads(output)
except JSONDecodeError as e:
print("Error: Unable to decode JSON, Error: {}. Manually run command ({}) to verify JSON output.".format(e, cmd))

But when I ran the script, this caused yet another error:

$ python3 python_script.py
Traceback (most recent call last):
File "/home/ck/Git/python_script/python_script.py", line 100, in <module>
data = json.loads(output)
File "/usr/lib/python3.10/json/__init__.py", line 346, in loads
return _default_decoder.decode(s)
File "/usr/lib/python3.10/json/decoder.py", line 337, in decode
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
File "/usr/lib/python3.10/json/decoder.py", line 355, in raw_decode
raise JSONDecodeError("Expecting value", s, err.value) from None
json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0)

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "/home/ck/Git/python_script/python_script.py", line 101, in <module>
except JSONDecodeError as e:
NameError: name 'JSONDecodeError' is not defined

The new NameError shows that JSONDecodeError doesn't actually exist. Huh?

JSONDecodeError = ValueError ?

After looking for this error, an answer on StackOverflow mentions that JSONDecodeError is not the "real error type", but rather inherited from "ValueError":

Since simplejson.decoder.JSONDecodeError actually inherits from ValueError [...]

Let's try ValueError in the except part then:

try:
data = json.loads(output)
except ValueError as e:
print("Error: Unable to decode JSON, Error: {}. Manually run command ({}) to verify JSON output.".format(e, cmd))

And this works quite nicely now:

$ python3 python_script.py
Error: Unable to decode JSON, Error: Expecting value: line 1 column 1 (char 0). Manually run command (['cat', 'output.json']) to verify JSON output.

But even though this now works, this is not the proper solution yet!

JSONDecodeError works (if named correctly)

Luckily my toot (a post on Mastodon) received a few comments and hints and it turns out that JSONDecodeError is indeed an error which can be used in the exception handling. However the error handler JSONDecodeError does not exist in the "global" namespace of the Python script and needs to be called from the json module :

try:
data = json.loads(output)
except json.JSONDecodeError as e:
print("Error: Unable to decode JSON, Error: {}. Manually run command ({}) to verify JSON output.".format(e, cmd))

This works and returns the same output as using ValueError:

$ python3 python_script.py
Error: Unable to decode JSON, Error: Expecting value: line 1 column 1 (char 0). Manually run command (['cat', 'output.json']) to verify JSON output.

Because the goal of the try+except error handling is to catch invalid JSON data, the json.JSONDecodeError should be preferred over ValueError.

Add a comment

Show form to leave a comment

Comments (newest first)

Claire Morgenthau from wrote on Feb 20th, 2024:

This error:
>> NameError: name 'JSONDecodeError' is not defined
Indicates that JSONDecodeError has not been imported. This Exception is defined in the "json" module (or, to be precise, the "json.decoder" module, but the base "json" module imports that Exception from "json.decoder" and shares it as well)
So, similar to you using "json.loads()" to parse a string containing JSON, you must also use "json.JSONDecodeError" in the "except" clause, like so:
>>> except json.JSONDecodeError as e:
One more tip: Use f-strings when possible, not "...".format()
So the body of the exception handler will be:
>>> print("Error: Unable to decode JSON, Error: {e}. Manually run command ({cmd}) to verify JSON output.")

---

Blog Tags:

AWS Android Ansible Apache Apple Atlassian BSD Backup Bash Bluecoat CMS Chef Cloud Coding Consul Containers CouchDB DB DNS Database Databases Docker ELK Elasticsearch Filebeat FreeBSD Galera Git GlusterFS Grafana Graphics HAProxy HTML Hacks Hardware Icinga Influx Internet Java KVM Kibana Kodi Kubernetes LVM LXC Linux Logstash Mac Macintosh Mail MariaDB Minio MongoDB Monitoring Multimedia MySQL NFS Nagios Network Nginx OSSEC OTRS Office PGSQL PHP Perl Personal PostgreSQL Postgres PowerDNS Proxmox Proxy Python Rancher Rant Redis Roundcube SSL Samba Seafile Security Shell SmartOS Solaris Surveillance Systemd TLS Tomcat Ubuntu Unix VMWare VMware Varnish Virtualization Windows Wireless Wordpress Wyse ZFS Zoneminder