ST_IsValid( g ) Returns 1 if the argument is geometrically valid, 0 if the argument is not geometrically valid. Geometry validity is defined by the OGC specification. The only valid empty geometry is represented in the form of an empty geometry collection value. ST_IsValid() returns 1 in this case. MySQL does not support GIS EMPTY values such as POINT EMPTY . ST_IsValid() handles its arguments as described in the introduction to this section, with this exception: If the geometry has a geographic SRS with a longitude or latitude that is out of range, an error occurs: If a longitude value is not in the range (−180, 180], an ER_GEOMETRY_PARAM_LONGITUDE_OUT_OF_RANGE error occurs. If a latitude value is not in the range [−90, 90], an ER_GEOMETRY_PARAM_LATITUDE_OUT_OF_RANGE error occurs. Ranges shown are in degrees. If an SRS uses another unit, the range uses the corresponding values in its unit. The exact range limits deviate slightly due to floating-point arithmetic.

mysql> SET @ls1 = ST_GeomFromText('LINESTRING(0 0,-0.00 0,0.0 0)');
mysql> SET @ls2 = ST_GeomFromText('LINESTRING(0 0, 1 1)');
mysql> SELECT ST_IsValid(@ls1);
+------------------+
| ST_IsValid(@ls1) |
+------------------+
|                0 |
+------------------+
mysql> SELECT ST_IsValid(@ls2);
+------------------+
| ST_IsValid(@ls2) |
+------------------+
|                1 |
+------------------+

ST_MakeEnvelope( pt1 , pt2 ) Returns the rectangle that forms the envelope around two points, as a Point , LineString , or Polygon . Calculations are done using the Cartesian coordinate system rather than on a sphere, spheroid, or on earth. Given two points pt1 and pt2 , ST_MakeEnvelope() creates the result geometry on an abstract plane like this: If pt1 and pt2 are equal, the result is the point pt1 . Otherwise, if ( pt1 , pt2 ) is a vertical or horizontal line segment, the result is the line segment ( pt1 , pt2 ) . Otherwise, the result is a polygon using pt1 and pt2 as diagonal points. The result geometry has an SRID of 0. ST_MakeEnvelope() handles its arguments as described in the introduction to this section, with these exceptions: If the arguments are not Point values, an ER_WRONG_ARGUMENTS error occurs. An ER_GIS_INVALID_DATA error occurs for the additional condition that any coordinate value of the two points is infinite or NaN . If any geometry has an SRID value for a geographic spatial reference system (SRS), an ER_NOT_IMPLEMENTED_FOR_GEOGRAPHIC_SRS error occurs.

mysql> SET @pt1 = ST_GeomFromText('POINT(0 0)');
mysql> SET @pt2 = ST_GeomFromText('POINT(1 1)');
mysql> SELECT ST_AsText(ST_MakeEnvelope(@pt1, @pt2));
+----------------------------------------+
| ST_AsText(ST_MakeEnvelope(@pt1, @pt2)) |
+----------------------------------------+
| POLYGON((0 0,1 0,1 1,0 1,0 0))         |
+----------------------------------------+

ST_Simplify( g , max_distance ) Simplifies a geometry using the Douglas-Peucker algorithm and returns a simplified value of the same type. The geometry may be any geometry type, although the Douglas-Peucker algorithm may not actually process every type. A geometry collection is processed by giving its components one by one to the simplification algorithm, and the returned geometries are put into a geometry collection as result. The max_distance argument is the distance (in units of the input coordinates) of a vertex to other segments to be removed. Vertices within this distance of the simplified linestring are removed. According to Boost.Geometry, geometries might become invalid as a result of the simplification process, and the process might create self-intersections. To check the validity of the result, pass it to ST_IsValid() . ST_Simplify() handles its arguments as described in the introduction to this section, with this exception: If the max_distance argument is not positive, or is NaN , an ER_WRONG_ARGUMENTS error occurs.

mysql> SET @g = ST_GeomFromText('LINESTRING(0 0,0 1,1 1,1 2,2 2,2 3,3 3)');
mysql> SELECT ST_AsText(ST_Simplify(@g, 0.5));
+---------------------------------+
| ST_AsText(ST_Simplify(@g, 0.5)) |
+---------------------------------+
| LINESTRING(0 0,0 1,1 1,2 3,3 3) |
+---------------------------------+
mysql> SELECT ST_AsText(ST_Simplify(@g, 1.0));
+---------------------------------+
| ST_AsText(ST_Simplify(@g, 1.0)) |
+---------------------------------+
| LINESTRING(0 0,3 3)             |
+---------------------------------+

ST_Validate( g ) Validates a geometry according to the OGC specification. A geometry can be syntactically well-formed (WKB value plus SRID) but geometrically invalid. For example, this polygon is geometrically invalid: POLYGON((0 0, 0 0, 0 0, 0 0, 0 ST_Validate() returns the geometry if it is syntactically well-formed and is geometrically valid, NULL if the argument is not syntactically well-formed or is not geometrically valid or is NULL . ST_Validate() can be used to filter out invalid geometry data, although at a cost. For applications that require more precise results not tainted by invalid data, this penalty may be worthwhile. If the geometry argument is valid, it is returned as is, except that if an input Polygon or MultiPolygon has clockwise rings, those rings are reversed before checking for validity. If the geometry is valid, the value with the reversed rings is returned. The only valid empty geometry is represented in the form of an empty geometry collection value. ST_Validate() returns it directly without further checks in this case. ST_Validate() handles its arguments as described in the introduction to this section, with the exceptions listed here: If the geometry has a geographic SRS with a longitude or latitude that is out of range, an error occurs: If a longitude value is not in the range (−180, 180], an ER_GEOMETRY_PARAM_LONGITUDE_OUT_OF_RANGE error occurs. If a latitude value is not in the range [−90, 90], an ER_GEOMETRY_PARAM_LATITUDE_OUT_OF_RANGE error occurs. Ranges shown are in degrees. The exact range limits deviate slightly due to floating-point arithmetic.

mysql> SET @ls1 = ST_GeomFromText('LINESTRING(0 0)');
mysql> SET @ls2 = ST_GeomFromText('LINESTRING(0 0, 1 1)');
mysql> SELECT ST_AsText(ST_Validate(@ls1));
+------------------------------+
| ST_AsText(ST_Validate(@ls1)) |
+------------------------------+
| NULL                         |
+------------------------------+
mysql> SELECT ST_AsText(ST_Validate(@ls2));
+------------------------------+
| ST_AsText(ST_Validate(@ls2)) |
+------------------------------+
| LINESTRING(0 0,1 1)          |
+------------------------------+