git clone https://github.com/isl-org/Open3D
2. Setup Python environments#
Activate the Python virtualenv or Conda environment. Check
which python to ensure that it shows the desired Python executable.
Alternatively, set the CMake flag -DPython3_ROOT=/path/to/python
to specify the path to the Python installation.
If Python binding is not needed, you can turn it off by -DBUILD_PYTHON_MODULE=OFF.
3. Config#
mkdir build
cd build
cmake ..
You can specify -DCMAKE_INSTALL_PREFIX=$HOME/open3d_install to control the
installation directory of make install. In the absence of
CMAKE_INSTALL_PREFIX, Open3D will be installed to a system location where
sudo may be required.
For more build options, see Compilation options and the root
CMakeLists.txt.
4. Build#
# On Ubuntu
make -j$(nproc)
# On macOS
make -j$(sysctl -n hw.physicalcpu)
To link a C++ project against the Open3D C++ library, please refer to
Link Open3D in C++ projects.
To install Open3D Python library, build one of the following options:
# Activate the virtualenv first
# Install pip package in the current python environment
make install-pip-package
# Create Python package in build/lib
make python-package
# Create pip wheel in build/lib
# This creates a .whl file that you can install manually.
make pip-package
Finally, verify the python installation with:
python -c "import open3d"
1. Setup Python binding environments#
Most steps are the steps for Ubuntu: 2. Setup Python environments.
Instead of which, check the Python path with where python.
2. Config#
mkdir build
cd build
:: Specify the generator based on your Visual Studio version
:: If CMAKE_INSTALL_PREFIX is a system folder, admin access is needed for installation
cmake -G "Visual Studio 16 2019" -A x64 -DCMAKE_INSTALL_PREFIX="<open3d_install_directory>" ..
Alternatively, you can open the Open3D.sln project with Visual Studio and
build the same target.
4. Install#
To install Open3D C++ library, build the INSTALL target in terminal or
in Visual Studio.
cmake --build . --config Release --target INSTALL
To link a C++ project against the Open3D C++ library, please refer to
Link Open3D in C++ projects.
To install Open3D Python library, build the corresponding python installation
targets in terminal or Visual Studio.
:: Activate the virtualenv first
:: Install pip package in the current python environment
cmake --build . --config Release --target install-pip-package
:: Create Python package in build/lib
cmake --build . --config Release --target python-package
:: Create pip package in build/lib
:: This creates a .whl file that you can install manually.
cmake --build . --config Release --target pip-package
Finally, verify the Python installation with:
python -c "import open3d; print(open3d)"
OpenMP#
We automatically detect if the C++ compiler supports OpenMP and compile Open3D
with it if the compilation option WITH_OPENMP is ON.
OpenMP can greatly accelerate computation on a multi-core CPU.
The default LLVM compiler on OS X does not support OpenMP.
A workaround is to install a C++ compiler with OpenMP support, such as gcc,
then use it to compile Open3D. For example, starting from a clean build
directory, run
brew install gcc --without-multilib
cmake -DCMAKE_C_COMPILER=gcc-6 -DCMAKE_CXX_COMPILER=g++-6 ..
make -j
This workaround has some compatibility issues with the source code of
GLFW included in 3rdparty.
Make sure Open3D is linked against GLFW installed on the OS.
Filament#
The visualization module depends on the Filament rendering engine and, by default,
Open3D uses a prebuilt version of it. You can also build Filament from source
by setting BUILD_FILAMENT_FROM_SOURCE=ON.
Whereas Open3D only requires a C++14 compiler, Filament needs a C++17 compiler
and only supports Clang 7+, the most recent version of Xcode, and Visual Studio 2019,
see their building instructions.
Make sure to use one of these compiler if you build Open3D with BUILD_FILAMENT_FROM_SOURCE=ON.
ML Module#
The ML module consists of primitives like operators and layers as well as high
level code for models and pipelines. To build the operators and layers, set
BUILD_PYTORCH_OPS=ON and/or BUILD_TENSORFLOW_OPS=ON.  Don’t forget to also
enable BUILD_CUDA_MODULE=ON for GPU support. To include the models and
pipelines from Open3D-ML in the python package, set BUNDLE_OPEN3D_ML=ON and
OPEN3D_ML_ROOT to the Open3D-ML repository. You can directly download
Open3D-ML from GitHub during the build with
OPEN3D_ML_ROOT=https://github.com/isl-org/Open3D-ML.git.
Warning
Compiling PyTorch ops with CUDA 11 and PyTorch < 1.9 may have
stability issues. See Open3D issue #3324
and PyTorch issue #52663
for more information on this problem. Official PyTorch wheels 1.9 and later
do not have this problem.
We recommend to compile Pytorch from source
with compile flags -Xcompiler -fno-gnu-unique or use the PyTorch 1.8.2
wheels from Open3D.
To reproduce the Open3D PyTorch 1.8.2 wheels see the builder repository here.
The following example shows the command for building the ops with GPU support
for all supported ML frameworks and bundling the high level Open3D-ML code.
# In the build directory
cmake -DBUILD_CUDA_MODULE=ON \
      -DGLIBCXX_USE_CXX11_ABI=OFF \
      -DBUILD_PYTORCH_OPS=ON \
      -DBUILD_TENSORFLOW_OPS=ON \
      -DBUNDLE_OPEN3D_ML=ON \
      -DOPEN3D_ML_ROOT=https://github.com/isl-org/Open3D-ML.git \
# Install the python wheel with pip
make -j install-pip-package
On Linux, importing Python libraries compiled with different CXX ABI may
cause segfaults in regex. https://stackoverflow.com/q/51382355/1255535. By
default, PyTorch and TensorFlow Python releases use the older CXX ABI; while
when compiled from source, the newer CXX11 ABI is enabled by default.
When releasing Open3D as a Python package, we set
-DGLIBCXX_USE_CXX11_ABI=OFF and compile all dependencies from source,
in order to ensure compatibility with PyTorch and TensorFlow Python releases.
If you build PyTorch or TensorFlow from source or if you run into ABI
compatibility issues with them, please:
Check PyTorch and TensorFlow ABI with
python -c "import torch; print(torch._C._GLIBCXX_USE_CXX11_ABI)"
python -c "import tensorflow; print(tensorflow.__cxx11_abi_flag__)"
Configure Open3D to compile all dependencies from source
with the corresponding ABI version obtained from step 1.
After installation of the Python package, you can check Open3D ABI version
with:
python -c "import open3d; print(open3d.pybind._GLIBCXX_USE_CXX11_ABI)"
To build Open3D with CUDA support, configure with:
cmake -DBUILD_CUDA_MODULE=ON -DCMAKE_INSTALL_PREFIX=<open3d_install_directory> ..
Please note that CUDA support is work in progress and experimental. For building
Open3D with CUDA support, ensure that CUDA is properly installed by running following commands:
nvidia-smi      # Prints CUDA-enabled GPU information
nvcc -V         # Prints compiler version
If you see an output similar to command not found, you can install CUDA toolkit
by following the official
documentation.
WebRTC remote visualization#
We provide pre-built binaries of the WebRTC library to
build Open3D with remote visualization. Currently, Linux, macOS and Windows are
supported for x86_64 architecture. If you wish to use a different version of
WebRTC or build for a different configuration or platform, please see the
official WebRTC documentation
and the Open3D build scripts.
Linux and macOS#
Please see the build script 3rdparty/webrtc/webrtc_build.sh. For Linux, you
can also use the provided 3rdparty/webrtc/Dockerfile.webrtc for building.
Windows#
We provide Windows MSVC static libraries built in Release and Debug mode built with
the static Windows runtime. This corresponds to building with the /MT and
/MTd options respectively. For the build procedure, please see
.github/workflows/webrtc.yml. Other configurations are not supported.
Caching compilation with ccache#
ccache is a compiler cache that can speed up the compilation process by avoiding
recompilation of the same source code. It can significantly speed up
recompilation of Open3D on Linux/macOS, even if you clear the build
directory. You’ll need ccache 4.0+ to cache both C++ and CUDA compilations.
After installing ccache, simply reconfigure and recompile the Open3D
library. Open3D’s CMake script can detect and use it automatically. You don’t
need to setup additional paths except for the ccache program itself.
Ubuntu 18.04, 20.04#
If you install ccache via sudo apt install ccache, the 3.x version will
be installed. To cache CUDA compilations, you’ll need the 4.0+ version. Here, we
demonstrate one way to setup ccache by compiling it from source, installing
it to ${HOME}/bin, and adding ${HOME}/bin to ${PATH}.
# Clone
git clone https://github.com/ccache/ccache.git
cd ccache
git checkout v4.6 -b 4.6
# Build
mkdir build
cd build
cmake -DZSTD_FROM_INTERNET=ON \
      -DHIREDIS_FROM_INTERNET=ON \
      -DCMAKE_BUILD_TYPE=Release \
      -DCMAKE_INSTALL_PREFIX=${HOME} \
make -j$(nproc)
make install -j$(nproc)
# Add ${HOME}/bin to ${PATH} in your ~/.bashrc
echo "PATH=${HOME}/bin:${PATH}" >> ~/.bashrc
# Restart the terminal now, or source ~/.bashrc
source ~/.bashrc
# Verify `ccache` has been installed correctly
which ccache
ccache --version