我试着在Raspberry Pi Pico上运行Rust代码。使用以下方法成功构建了一个简单的 “眨眼”例子 应用程序(看上去是这样的)：

cargo build --release --target=thumbv6m-none-eabi

我已将 elf2uf2-rs 安装如下：

cargo install elf2uf2-rs

然后，我尝试在Raspberry Pi Pico上运行眨眼应用程序，使用：

cargo run --release --target=thumbv6m-none-eabi

但是这个消息失败了，其中"rp2“是我的二进制文件的名称：

target/thumbv6m-none-eabi/release/rp2: cannot execute binary file

有什么可能出错的建议吗？

这是我的 Cargo.toml

[package]
name = "rp2"
version = "0.1.0"
edition = "2021"
[dependencies]
rp2040-hal = "0.3.0"
cortex-m = "0.7.2"
embedded-hal = { version = "0.2.5", features = ["unproven"] }
eh1_0_alpha = { version="=1.0.0-alpha.6", package="embedded-hal", optional=true }
embedded-time = "0.12.0"
panic-halt = "0.2.0"
rp2040-boot2 = "0.2.0"
cortex-m-rt = "0.7"
rp-pico = "0.2.0"
[dev-dependencies]
cortex-m-rt = "0.7"
panic-halt = "0.2.0"
rp2040-boot2 = "0.2.0"
[profile.dev]
panic = "abort"
[profile.release]
panic = "abort"

更新

我现在添加了一个包含以下内容的文件 .cargo/config.toml ：

# Choose a default "cargo run" tool.
# probe-run is recommended if you have a debugger
# elf2uf2-rs loads firmware over USB when the rp2040 is in boot mode
[target.'cfg(all(target_arch = "arm", target_os = "none"))']
# runner = "probe-run --chip RP2040"
runner = "elf2uf2-rs -d"
rustflags = [
    "-C", "linker=flip-link",
    "-C", "link-arg=--nmagic",
    "-C", "link-arg=-Tlink.x",
    "-C", "link-arg=-Tdefmt.x",
    # Code-size optimizations.
    #   trap unreachable can save a lot of space, but requires nightly compiler.
    #   uncomment the next line if you wish to enable it
    # "-Z", "trap-unreachable=no",
    "-C", "inline-threshold=5",
    "-C", "no-vectorize-loops",
[build]
target = "thumbv6m-none-eabi"

和一个包含以下内容的 memory.x 文件：

MEMORY {
    BOOT2 : ORIGIN = 0x10000000, LENGTH = 0x100
    FLASH : ORIGIN = 0x10000100, LENGTH = 2048K - 0x100
    RAM   : ORIGIN = 0x20000000, LENGTH = 256K
EXTERN(BOOT2_FIRMWARE)
SECTIONS {
    /* ### Boot loader */
    .boot2 ORIGIN(BOOT2) :