After esp-idf update, UART doesnt work. The following code, result in:
Code:
Select all
uart_config_t uart_config;
uart_config.baud_rate = 115200;
uart_config.data_bits = UART_DATA_8_BITS;
uart_config.parity = UART_PARITY_DISABLE;
uart_config.stop_bits = UART_STOP_BITS_1;
uart_config.flow_ctrl = UART_HW_FLOWCTRL_DISABLE;
uart_config.rx_flow_ctrl_thresh = 120;
uart_param_config(MODULE_UART_NUM, &uart_config);
uart_set_pin(MODULE_UART_NUM, GPIO_NUM_26, GPIO_NUM_25, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
uart_driver_install(MODULE_UART_NUM, 2048, 2048, 10, 17, NULL);
Code:
Select all
Guru Meditation Error of type StoreProhibited occurred on core 0. Exception was unhandled.
Register dump:
PC : 0x40105872 PS : 0x00060e30 A0 : 0x801046ac A1 : 0x3ffc37b0
A2 : 0x00000002 A3 : 0x00000800 A4 : 0x00000800 A5 : 0x3ffbdfa4
A6 : 0x3ffcb924 A7 : 0x00000000 A8 : 0x00000011 A9 : 0x3ffc3790
A10 : 0x3ffcb924 A11 : 0x00000008 A12 : 0x00000000 A13 : 0x3ffcb924
A14 : 0x3ffcb7c8 A15 : 0x3ffcb790 SAR : 0x00000007 EXCCAUSE: 0x0000001d
EXCVADDR: 0x00000011 LBEG : 0x400014fd LEND : 0x4000150d LCOUNT : 0xffffffff
Backtrace: 0x40105872:0x3ffc37b0 0x401046ac:0x3ffc3800 0x40103fb8:0x3ffc3840 0x400d0ffd:0x3ffc38a0
