SOM-RK3399_link管理

link管理

链接快照平台

输入网页链接，自动生成快照
标签化管理网页链接

相关文章推荐

傻傻的课本 · 硬货系列 (二)！！使用 python ...· 1 周前 ·

不拘小节的电影票 · 将动态变量添加到警报模板· 4 月前 ·

风流倜傥的松球 · ODBC password not ...· 9 月前 ·

月球上的灌汤包 · JsonPath：一个新颖的json处理工具 ...· 1 年前 ·

玉树临风的野马 · 蛋白质信号肽预测 - 在线工具 - ...· 1 年前 ·

没读研的油条 · 该页面不存在· 1 年前 ·

Hats & Docks

BakeBit Sensors/Modules

LCD Module

Value Pack & Kit

OS Support Android 8.1
Android 10
Lubuntu 16.04 (32-bit)
FriendlyCore 18.04
FriendlyCore 20.04
FriendlyDesktop 18.04
FriendlyWrt 21.02
FriendlyWrt 22.03
Debian 10 Desktop
Debian 11 Desktop Buildroot Kernel version Linux-4.4-LTS
Linux-4.19
Linux-5.15
U-boot-2014.10
U-boot-2017.09
SOC: Rockchip RK3399
Number of Cores: big.LITTLE, 64-bit Dual Core Cortex-A72 + Quad Core Cortex-A53
Frequency: Cortex-A72(up to 2.0GHz), Cortex-A53(up to 1.5GHz) Mali-T864 GPU，supports OpenGL® ES1.1/2.0/3.0/3.1,OpenCL™, DX11, and AFBC 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc DDR3 RAM: Dual-Channel 2GB DDR3 Storage: 16GB eMMC 5.1 Flash Network: Native Gigabit Ethernet PMU Power Management: RK808-D PMIC, cooperated with independent DC/DC, enabling DVFS, software power-down, RTC wake-up, system sleep mode PCIe x4, compatible with PCIe 2.1, Dual operation mode; USB Host: USB 2.0: 2 independent native USB 2.0 Host
USB 3.0: 1 native USB 3.0 Host
USB Type-C: Supports USB3.0 Type-C and DisplayPort 1.2 Alt Mode on USB Type-C WiFi: 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module, dual antenna interface Debug Serial Port/UART0: one Debug UART, 3V level, 1500000bps Video Input: one or two 4-Lane MIPI-CSI, dual ISP, up to 13MPix/s，supports simultaneous input of dual camera data Video output: HDMI: HDMI 2.0a, supports 4K@60Hz，HDCP 1.4/2.2
DP on Type-C: DisplayPort 1.2 Alt Mode on USB Type-C
LCD Interface: one eDP 1.3（4-Lane，10.8Gbps）, one or two 4-Lane MIPI-DSI Buttons Power button x1
Reset button x1
Recovery button x1 GPIOs, I2S, I2C, PWM, UART, SPI, ADCs 2 X 1.8V I2C, 1 x 3V I2C
1 x 3V UART/SPI
2 x PWM
1 x IR-RX
1 x SPDIF_TX
1 x 1.8V I2S
6 x 1.8V GPIOs, 8 x 3V GPIOs
ADC: 3 x 1.8V ADC inputs SDIO/MMC 1x SDIO/MMC for SD Card 1 x power LED and 1 x GPIO Controlled LED PCB Dimension: 8 Layer, 50 mm x 69.6 mm, 260 Pin edge connector Power: DC 12V/1A Working temperature: -20℃ to 70℃ Android 10
Lubuntu 16.04 (32-bit) with GPU Acceleration
FriendlyCore 18.04 (64-bit) pre-installed Qt-5.10, OpenCV4 with GPU & VPU Acceleration
FriendlyDesktop 18.04 (64-bit) pre-installed Qt-5.10, OpenCV4, Chromium with GPU & VPU Acceleration
Buildroot Linux: all are open source
FriendlyWrt 21.02.1 (64-bit)