I misconfigured network settings as a result I am unable to connect into Openwrt using ssh.
Is there a way to reflash/reset openwrt and start over again?
AnythingI have looped upon there did not help me:
OpenWrt Wiki – 1 Oct 16
The reason why I failed to connect is, because I misconfigured the /etc/config/network as an attemp to set up the router as a device in my lan with static IP.
Is there a way to reset the initial settings?
The installation instructions in order to install OpenWrt are the following:
https://openwrt.org/toh/avm/avm_fritz_box_7360_v2
Also in this router how I can connect a serial device as well? Is a USB keyboard a valid one?
Powered off my router
Connected an ethernet cable from routerts physical ethernet port
LAN1
to my computer's ethernet port
Set up my computer's wired ethernet connection with static ip 192.168.1.2 mask /24 (255.255.255.0) and network gateway 192.168.1.1
Powered on the router
pressing both DECT and WLAN like a maniac ,as this
musician
was pressing the piano key, till power led comes red.
Then I ssh via ssh
[email protected]
Once I managed to have an ssh session as
guide
says I did:
mount_root
Then I fixed my network settings.
