Posted on October 04, 2017 at 11:55
Simply I am trying to program my stm32f4 discovery without any ide.Another word I want to use make command on the terminal in Windows.I know this makefile wrote for macos I cant convert the code working under Windows.
This is my Makefile:
♯ STM32F4-Discovery Makefile for Mac OSX
SRCS=$(wildcard *.c)
♯ Add assembly source files here or use $(wildcard *.s) for all .s files
S_SRCS = CortexM4asmOps.s
♯ Project name
PROJ_NAME = blinky
OUTPATH = build
OUTPATH := $(abspath $(OUTPATH))
BASEDIR := $(abspath ./)
MKDIR_P = Mkdir
♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯
♯ Check for valid float argument
♯ NOTE that you have to run make clan after
♯ changing these as hardfloat and softfloat are not
♯ binary compatible
ifneq ($(FLOAT_TYPE), hard)
ifneq ($(FLOAT_TYPE), soft)
&sharpoverride FLOAT_TYPE = hard
override FLOAT_TYPE = soft
endif
endif
♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯
AS=$(BINPATH)arm-none-eabi-as
CC=$(BINPATH)arm-none-eabi-gcc
LD=$(BINPATH)arm-none-eabi-gcc
OBJCOPY=$(BINPATH)arm-none-eabi-objcopy
OBJDUMP=$(BINPATH)arm-none-eabi-objdump
SIZE=$(BINPATH)arm-none-eabi-size
LINKER_SCRIPT = stm32_flash.ld
CPU = -mcpu=cortex-m4 -mthumb
CFLAGS = $(CPU) -c -std=gnu99 -g -O2 -Wall
LDFLAGS = $(CPU) -mlittle-endian -mthumb-interwork -nostartfiles -Wl,--gc-sections,-Map=$(OUTPATH)/$(PROJ_NAME).map,--cref --specs=nano.specs
ifeq ($(FLOAT_TYPE), hard)
CFLAGS += -fsingle-precision-constant -Wdouble-promotion
CFLAGS += -mfpu=fpv4-sp-d16 -mfloat-abi=hard
else
CFLAGS += -msoft-float
endif
♯ Default to STM32F40_41xxx if no device is passed
ifeq ($(DEVICE_DEF), )
DEVICE_DEF = STM32F40_41xxx
endif
CFLAGS += -D$(DEVICE_DEF)
vpath %.a lib
♯ Includes
INCLUDE_PATHS = -I$(BASEDIR)/inc -I$(BASEDIR)/lib/cmsis/stm32f4xx -I$(BASEDIR)/lib/cmsis/include -I$(BASEDIR)
INCLUDE_PATHS += -I$(BASEDIR)/lib/Conf
INCLUDE_PATHS += -I$(BASEDIR)/lib/STM32F4xx_StdPeriph_Driver/inc
♯ Library paths
LIBPATHS = -L$(BASEDIR)/lib/STM32F4xx_StdPeriph_Driver
♯ Libraries to link
LIBS = -lstdperiph -lc -lgcc -lnosys
OBJS = $(SRCS:.c=.o)
OBJS += $(S_SRCS:.s=.o)
♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯♯
.PHONY: lib proj
all: dir lib proj
$(SIZE) $(OUTPATH)/$(PROJ_NAME).elf
lib:
$(MAKE) -C lib FLOAT_TYPE=$(FLOAT_TYPE) BINPATH=$(BINPATH) DEVICE_DEF=$(DEVICE_DEF) BASEDIR=$(BASEDIR)
proj: $(OUTPATH)/$(PROJ_NAME).elf
.s.o:
$(AS) $(CPU) -o $(addprefix $(OUTPATH)/, $@) $<
.c.o:
$(CC) $(CFLAGS) -std=gnu99 $(INCLUDE_PATHS) -o $(addprefix $(OUTPATH)/, $@) $<
$(OUTPATH)/$(PROJ_NAME).elf: $(OBJS)
$(LD) $(LDFLAGS) -T$(LINKER_SCRIPT) $(LIBPATHS) -o $@ $(addprefix $(OUTPATH)/, $^) $(LIBS) $(LD_SYS_LIBS)
$(OBJCOPY) -O ihex $(OUTPATH)/$(PROJ_NAME).elf $(OUTPATH)/$(PROJ_NAME).hex
$(OBJCOPY) -O binary $(OUTPATH)/$(PROJ_NAME).elf $(OUTPATH)/$(PROJ_NAME).bin
$(OBJDUMP) -S --disassemble $(OUTPATH)/$(PROJ_NAME).elf > $(OUTPATH)/$(PROJ_NAME).dis
dir:
$(MKDIR_P) $(OUTPATH)
clean:
rm -f $(OUTPATH)/*.o
rm -f $(OUTPATH)/$(PROJ_NAME).elf
rm -f $(OUTPATH)/$(PROJ_NAME).hex
rm -f $(OUTPATH)/$(PROJ_NAME).bin
rm -f $(OUTPATH)/$(PROJ_NAME).dis
rm -f $(OUTPATH)/$(PROJ_NAME).map
♯ Remove the following line if you don't want to clean the Libraries as well
$(MAKE) clean -C lib
flash:
st-flash write build/$(PROJ_NAME).bin 0x08000000
<=====================================================================>
Gives me this error:
Mkdir C:/Users/As/Downloads/STM32F4_Examples-master/01_Blinky_btn/build
process_begin: CreateProcess(NULL, Mkdir C:/Users/As/Downloads/STM32F4_Examples-master/01_Blinky_btn/build, ...) failed.
Makefile:102: recipe for target 'dir' failed
make: *** [dir] Error 2
Full project here:
https://github.com/TDAbboud/STM32F4_Examples/tree/master/01_Blinky_btn
#arm-gcc #stm32f4-discovery #makefile
STM32CubeMX project fails to build after project is re-named and configuration.ioc file changes
in
STM32 MCUs Embedded software
2023-12-06
makefile:##: *** multiple target patterns. Stop.
in
STM32CubeIDE (MCUs)
2023-11-22
