Networking and RabbitMQ

Overview ​

Clients communicate with RabbitMQ over the network. All protocols supported by the broker are TCP-based. Both RabbitMQ and the operating system provide a number of knobs that can be tweaked. Some of them are directly related to TCP and IP operations, others have to do with application-level protocols such as TLS. This guide covers multiple topics related to networking in the context of RabbitMQ. This guide is not meant to be an extensive reference but rather an overview. Some tuneable parameters discussed are OS-specific. This guide focuses on Linux when covering OS-specific subjects, as it is the most common platform RabbitMQ is deployed on.

There are several areas which can be configured or tuned. Each has a section in this guide:

This guide also covers a few topics closely related to networking:

Except for OS kernel parameters and DNS, all RabbitMQ settings are configured via RabbitMQ configuration file(s) .

Networking is a broad topic. There are many configuration options that can have positive or negative effect on certain workloads. As such, this guide does not try to be a complete reference but rather offer an index of key tunable parameters and serve as a starting point.

In addition, this guide touches on a few topics closely related to networking, such as

VMware Tanzu RabbitMQ commercial offerings provide an Intra-cluster Compression feature. The previous documentation link goes to the Tanzu RabbitMQ for Kubernetes commercial offering.

A methodology for troubleshooting of networking-related issues is covered in a separate guide.

Network Interfaces for Client Connections ​

For RabbitMQ to accept client connections, it needs to bind to one or more interfaces and listen on (protocol-specific) ports. One such interface/port pair is called a listener in RabbitMQ parlance. Listeners are configured using the listeners.tcp.* configuration option(s).

TCP listeners configure both an interface and port. The following example demonstrates how to configure AMQP 0-9-1 and AMQP 1.0 listener to use a specific IP and the standard port:

listeners.tcp.1 = 192.168.1.99:5672

By default, RabbitMQ will listen on port 5672 on all available interfaces . It is possible to limit client connections to a subset of the interfaces or even just one, for example, IPv6-only interfaces. The following few sections demonstrate how to do it.

Listening on Dual Stack (Both IPv4 and IPv6) Interfaces ​

The following example demonstrates how to configure RabbitMQ to listen on localhost only for both IPv4 and IPv6:

listeners.tcp.1 = 127.0.0.1:5672
listeners.tcp.2 = ::1:5672

With modern Linux kernels and Windows releases, when a port is specified and RabbitMQ is configured to listen on all IPv6 addresses but IPv4 is not deactivated explicitly, IPv4 address will be included, so

listeners.tcp.1 = :::5672

is equivalent to

listeners.tcp.1 = 0.0.0.0:5672
listeners.tcp.2 = :::5672

Listening on IPv6 Interfaces Only ​

In this example RabbitMQ will listen on an IPv6 interface only:

listeners.tcp.1 = fe80::2acf:e9ff:fe17:f97b:5672

In IPv6-only environments the node must also be configured to use IPv6 for inter-node communication and CLI tool connections .

Listening on IPv4 Interfaces Only ​

In this example RabbitMQ will listen on an IPv4 interface with specified IP address only:

listeners.tcp.1 = 192.168.1.99:5672 # Plain AMQP
listeners.ssl.1 = 192.168.1.99:5671 # TLS (AMQPS)

It is possible to deactivate non-TLS connections by deactivating all regular TCP listeners. Only TLS-enabled clients will be able to connect:

# deactivates non-TLS listeners, only TLS-enabled (activated) clients will be able to connect
listeners.tcp = none

listeners.ssl.default = 5671

ssl_options.cacertfile = /path/to/ca_certificate.pem
ssl_options.certfile   = /path/to/server_certificate.pem
ssl_options.keyfile    = /path/to/server_key.pem
ssl_options.verify     = verify_peer
ssl_options.fail_if_no_peer_cert = false

Port Access ​

RabbitMQ nodes bind to ports (open server TCP sockets) in order to accept client and CLI tool connections. Other processes and tools such as SELinux may prevent RabbitMQ from binding to a port. When that happens, the node will fail to start.

CLI tools, client libraries and RabbitMQ nodes also open connections (client TCP sockets). Firewalls can prevent nodes and CLI tools from communicating with each other. Make sure the following ports are accessible:

It is possible to configure RabbitMQ to use different ports and specific network interfaces .

How to Temporarily Stop New Client Connections ​

Client connection listeners can be suspended to prevent new client connections from being accepted. Existing connections will not be affected in any way.

This can be useful during node operations and is one of the steps performed when a node is put into maintenance mode .

To suspend all listeners on a node and prevent new client connections to it, use rabbitmqctl suspend_listeners :

rabbitmqctl suspend_listeners

As all other CLI commands, this command can be invoked against an arbitrary node (including remote ones) using the -n switch:

# suspends listeners on node [email protected]: it won't accept any new client connections
rabbitmqctl suspend_listeners -n [email protected]

To resume all listeners on a node and make it accept new client connections again, use rabbitmqctl resume_listeners :

rabbitmqctl resume_listeners

# resumes listeners on node [email protected]: it will accept new client connections again
rabbitmqctl resume_listeners -n [email protected]

Both operations will leave log entries in the node's log.

EPMD and Inter-node Communication ​

What is EPMD and How is It Used? ​

epmd (for Erlang Port Mapping Daemon) is a small additional daemon that runs alongside every RabbitMQ node and is used by the runtime to discover what port a particular node listens on for inter-node communication. The port is then used by peer nodes and CLI tools .

When a node or CLI tool needs to contact node rabbit@hostname2 it will do the following:

EPMD Interface ​

epmd will listen on all interfaces by default. It can be limited to a number of interfaces using the ERL_EPMD_ADDRESS environment variable:

# makes epmd listen on loopback IPv6 and IPv4 interfaces
export ERL_EPMD_ADDRESS="::1"

When ERL_EPMD_ADDRESS is changed, both RabbitMQ node and epmd on the host must be stopped. For epmd , use

# Stops local epmd process.
# Use after shutting down RabbitMQ.
epmd -kill

to terminate it. The service will be started by the local RabbitMQ node automatically on boot.

The loopback interface will be implicitly added to that list (in other words, epmd will always bind to the loopback interface).

EPMD Port ​

The default epmd port is 4369, but this can be changed using the ERL_EPMD_PORT environment variable:

# makes epmd bind to port 4369
export ERL_EPMD_PORT="4369"

All hosts in a cluster must use the same port.

When ERL_EPMD_PORT is changed, both RabbitMQ node and epmd on the host must be stopped. For epmd , use

# Stops local epmd process.
# Use after shutting down RabbitMQ.
epmd -kill

to terminate it. The service will be started by the local RabbitMQ node automatically on boot.

Inter-node Communication Port Range ​

RabbitMQ nodes will use a port from a certain range known as the inter-node communication port range. The same port is used by CLI tools when they need to contact the node. The range can be modified.

RabbitMQ nodes communicate with CLI tools and other nodes using a port known as the distribution port . It is dynamically allocated from a range of values. For RabbitMQ, the default range is limited to a single value computed as RABBITMQ_NODE_PORT (AMQP 0-9-1 and AMQP 1.0 port) + 20000, which results in using port 25672. This single port can be configured using the RABBITMQ_DIST_PORT environment variable.

RabbitMQ command line tools also use a range of ports. The default range is computed by taking the RabbitMQ distribution port value and adding 10000 to it. The next 10 ports are also part of this range. Thus, by default, this range is 35672 through 35682. This range can be configured using the RABBITMQ_CTL_DIST_PORT_MIN and RABBITMQ_CTL_DIST_PORT_MAX environment variables. Note that limiting the range to a single port will prevent more than one CLI tool from running concurrently on the same host and may affect CLI commands that require parallel connections to multiple cluster nodes. A port range of 10 is therefore a recommended value.

When configuring firewall rules, remote connections on the inter-node communication port must be allowed from every cluster node's IP address and every host where CLI tools might be used. epmd port must be open for CLI tools and clustering to function.

On Windows, the following settings have no effect when RabbitMQ runs as a service. Please see Windows Configuration for details.

The range used by RabbitMQ can also be controlled via two configuration keys in rabbitmq.conf :

They define the range's lower and upper bounds, inclusive.

The example below uses a range with a single port but a value different from default:

inet_dist_listen_min = 33672
inet_dist_listen_max = 33672

To verify what port is used by a node for inter-node and CLI tool communication,

epmd -names

on that node's host. It will produce output that looks like this:

epmd: up and running on port 4369 with data:
name rabbit at port 25672

Inter-node Communication Buffer Size Limit ​

Inter-node connections use a buffer for data pending to be sent. Temporary throttling on inter-node traffic is applied when the buffer is at max allowed capacity. The limit is controlled via the RABBITMQ_DISTRIBUTION_BUFFER_SIZE environment variable in kilobytes. Default value is 128 MB ( 128000 kB).

In clusters with heavy inter-node traffic increasing this value may have a positive effect on throughput. Values lower than 64 MB are not recommended.

Using IPv6 for Inter-node Communication (and CLI Tools) ​

In addition to exclusive IPv6 use for client connections for client connections, a node can also be configured to use IPv6 exclusively for inter-node and CLI tool connectivity.

This involves configuration in a few places:

It is possible to use IPv6 for inter-node and CLI tool communication but use IPv4 for client connections or vice versa. Such configurations can be hard to troubleshoot and reason about, so using the same IP version (e.g. IPv6) across the board or a dual stack setup is recommended.

Inter-node Communication Protocol ​

To instruct the runtime to use IPv6 for inter-node communication and related tasks, use the RABBITMQ_SERVER_ADDITIONAL_ERL_ARGS environment variable to pass a couple of flags:

# these flags will be used by RabbitMQ nodes
RABBITMQ_SERVER_ADDITIONAL_ERL_ARGS="-kernel inetrc '/etc/rabbitmq/erl_inetrc' -proto_dist inet6_tcp"
# these flags will be used by CLI tools
RABBITMQ_CTL_ERL_ARGS="-proto_dist inet6_tcp"

RABBITMQ_SERVER_ADDITIONAL_ERL_ARGS above uses two closely related flags:

The erl_inetrc file at /etc/rabbitmq/erl_inetrc will control hostname resolution settings. For IPv6-only environments, it must include the following line:

%% Tells DNS client on RabbitMQ nodes and CLI tools to resolve hostnames to IPv6 addresses.
%% The trailing dot is not optional.
{inet6,true}.

CLI Tools ​

With CLI tools, use the same runtime flag as used for RabbitMQ nodes above but provide it using a different environment variable, RABBITMQ_CTL_ERL_ARGS :

RABBITMQ_CTL_ERL_ARGS="-proto_dist inet6_tcp"

Note that once instructed to use IPv6, CLI tools won't be able to connect to nodes that do not use IPv6 for inter-node communication. This involves the epmd service running on the same host as target RabbitMQ node.

epmd ​

epmd is a small helper daemon that runs next to a RabbitMQ node and lets its peers and CLI tools discover what port they should use to communicate to it. It can be configured to bind to a specific interface, much like RabbitMQ listeners. This is done using the ERL_EPMD_ADDRESS environment variable:

export ERL_EPMD_ADDRESS="::1"

By default RabbitMQ nodes will use an IPv4 interface when connecting to epmd . Nodes that are configured to use IPv6 for inter-node communication ( see above ) will also use IPv6 to connect to epmd .

When epmd is configured to use IPv6 exclusively but RabbitMQ nodes are not, RabbitMQ will log an error message similar to this:

Protocol 'inet_tcp': register/listen error: econnrefused

systemd Unit File ​

On distributions that use systemd, the epmd.socket service controls network settings of epmd . It is possible to configure epmd to only listen on IPv6 interfaces:

ListenStream=[::1]:4369

The service will need reloading after its unit file has been updated:

systemctl daemon-reload
systemctl restart epmd.socket epmd.service

Intermediaries: Proxies and Load Balancers ​

Proxies and load balancers are fairly commonly used to distribute client connections between cluster nodes . Proxies can also be useful to make it possible for clients to access RabbitMQ nodes without exposing them publicly. Intermediaries can also have side effects on connections.

Proxy Effects ​

Proxies and load balancers introduce an extra network hop (or even multiple ones) between client and its target node. Intermediaries also can become a network contention point: their throughput will then become a limiting factor for the entire system. Network bandwidth overprovisioning and throughput monitoring for proxies and load balancers are therefore very important.

Intermediaries also may terminate "idle" TCP connections when there's no activity on them for a certain period of time. Most of the time it is not desirable. Such events will result in abrupt connection closure log messages on the server end and I/O exceptions on the client end.

When heartbeats are enabled on a connection, it results in periodic light network traffic. Therefore heartbeats have a side effect of guarding client connections that can go idle for periods of time against premature closure by proxies and load balancers.

Heartbeat timeouts from 10 to 30 seconds will produce periodic network traffic often enough (roughly every 5 to 15 seconds) to satisfy defaults of most proxy tools and load balancers. Values that are too low will produce false positives.

Proxy Protocol ​

RabbitMQ supports Proxy protocol versions 1 (text header format) and 2 (binary header format).

The protocol makes servers such as RabbitMQ aware of the actual client IP address when connections go over a proxy (e.g. HAproxy or AWS ELB ). This makes it easier for the operator to inspect connection origins in the management UI or CLI tools.

The protocol spec dictates that either it must be applied to all connections or none of them for security reasons, this feature is turned off by default and needs to be turned on for individual protocols supported by RabbitMQ. To turn it on for AMQP 0-9-1 and AMQP 1.0 clients:

proxy_protocol = true

When proxy protocol is turned on, clients won't be able to connect to RabbitMQ directly unless they themselves support the protocol. Therefore, when this option is turned on, all client connections must go through a proxy that also supports the protocol and is configured to send a Proxy protocol header. HAproxy and AWS ELB documentation explains how to do it.

When proxy protocol is turned on and connections go through a compatible proxy, no action or modifications are required from client libraries. The communication is entirely transparent to them.

STOMP and MQTT , as well as Web STOMP and Web MQTT have their own settings that enable support for the proxy protocol.

TLS (SSL) Support ​

It is possible to encrypt connections using TLS with RabbitMQ. Authentication using peer certificates is also possible. Please refer to the TLS/SSL guide for more information.

Tuning for Throughput ​

Tuning for throughput is a common goal. Improvements can be achieved by

For the latter two, see the OS-level tuning section below.

Note that tuning for throughput will involve trade-offs. For example, increasing TCP buffer sizes will increase the amount of RAM used by every connection, which can be a significant total server RAM use increase.

TCP Buffer Size ​

This is one of the key tunable parameters. Every TCP connection has buffers allocated for it. Generally speaking, the larger these buffers are, the more RAM is used per connection and better the throughput. On Linux, the OS will automatically tune TCP buffer size by default, typically settling on a value between 80 and 120 KB.

For maximum throughput, it is possible to increase buffer size using a group of config options:

Note that increasing TCP buffer size will increase how much RAM the node uses for every client connection.

The following example sets TCP buffers for AMQP 0-9-1 connections to 192 KiB:

tcp_listen_options.backlog = 128
tcp_listen_options.nodelay = true
tcp_listen_options.linger.on      = true
tcp_listen_options.linger.timeout = 0
tcp_listen_options.sndbuf = 196608
tcp_listen_options.recbuf = 196608

The same example for MQTT:

mqtt.tcp_listen_options.backlog = 128
mqtt.tcp_listen_options.nodelay = true
mqtt.tcp_listen_options.linger.on      = true
mqtt.tcp_listen_options.linger.timeout = 0
mqtt.tcp_listen_options.sndbuf = 196608
mqtt.tcp_listen_options.recbuf = 196608

and STOMP:

stomp.tcp_listen_options.backlog = 128
stomp.tcp_listen_options.nodelay = true
stomp.tcp_listen_options.linger.on      = true
stomp.tcp_listen_options.linger.timeout = 0
stomp.tcp_listen_options.sndbuf = 196608
stomp.tcp_listen_options.recbuf = 196608

Note that setting send and receive buffer sizes to different values can be dangerous and not recommended .

Tuning for a Large Number of Connections ​

Some workloads, often referred to as "the Internet of Things", assume a large number of client connections per node, and a relatively low volume of traffic from each node. One such workload is sensor networks: there can be hundreds of thousands or millions of sensors deployed, each emitting data every several minutes. Optimising for the maximum number of concurrent clients can be more important than for total throughput.

Several factors can limit how many concurrent connections a single node can support:

Open File Handle Limit ​

Most operating systems limit the number of file handles that can be opened at the same time. When an OS process (such as RabbitMQ's Erlang VM) reaches the limit, it won't be able to open any new files or accept any more TCP connections. The limit will also affect how much memory the Erlang runtime will allocate upfront. This means that the limit on some modern distributions can be too high and need lowering.

How to Override the Limit ​

How the limit is configured varies from OS to OS and distribution to distribution, e.g. depending on whether systemd is used. For Linux, Controlling System Limits on Linux in our Debian and RPM installation guides provides. Linux kernel limit management is covered by many resources on the Web, including the open file handle limit .

With Docker, Docker daemon configuration file in the host controls the limits.

MacOS uses a similar system .

On Windows, the limit for the Erlang runtime is controlled exclusively using the ERL_MAX_PORTS environment variable.

The ERL_MAX_PORTS Environment Variable ​

The runtime has a related limit, controlled via the ERL_MAX_PORTS environment variable.

By default the limit is usually set to 65536. When overriding the max open file handle limit to a higher value, ERL_MAX_PORTS must be overridden accordingly.

To find out the effective ERL_MAX_PORTS value of a RabbitMQ node, use the following command:

rabbitmqctl eval 'erlang:system_info(port_limit).'

Basic Estimates of the Necessary Limit ​

When optimising for the number of concurrent connections, make sure your system has enough file descriptors to support not only client connections but also files the node may use. To calculate a ballpark limit, multiply the number of connections per node by 1.5. For example, to support 100,000 connections, set the limit to 150,000.

Increasing the limit slightly increases the amount of RAM idle machine uses but this is a reasonable trade-off.

Per Connection Memory Consumption: TCP Buffer Size ​

See the section above for an overview.

For maximum number of concurrent client connections, it is possible to decrease TCP buffer size using a group of config options:

Decreasing TCP buffer size will decrease how much RAM the node uses for every client connection.

This is often necessary in environments where the number of concurrent connections sustained per node is more important than throughput.

The following example sets TCP buffers for AMQP 0-9-1 connections to 32 KiB:

tcp_listen_options.backlog = 128
tcp_listen_options.nodelay = true
tcp_listen_options.linger.on      = true
tcp_listen_options.linger.timeout = 0
tcp_listen_options.sndbuf  = 32768
tcp_listen_options.recbuf  = 32768

The same example for MQTT:

mqtt.tcp_listen_options.backlog = 128
mqtt.tcp_listen_options.nodelay = true
mqtt.tcp_listen_options.linger.on      = true
mqtt.tcp_listen_options.linger.timeout = 0
mqtt.tcp_listen_options.sndbuf  = 32768
mqtt.tcp_listen_options.recbuf  = 32768

and for STOMP:

stomp.tcp_listen_options.backlog = 128
stomp.tcp_listen_options.nodelay = true
stomp.tcp_listen_options.linger.on      = true
stomp.tcp_listen_options.linger.timeout = 0
stomp.tcp_listen_options.sndbuf  = 32768
stomp.tcp_listen_options.recbuf  = 32768

Note that lowering TCP buffer sizes will result in a proportional throughput drop, so an optimal value between throughput and per-connection RAM use needs to be found for every workload.

Setting send and receive buffer sizes to different values is dangerous and is not recommended. Values lower than 8 KiB are not recommended.

Reducing CPU Footprint of Stats Emission ​

A large number of concurrent connections will generate a lot of metric (stats) emission events. This increases CPU consumption even with mostly idle connections. To reduce this footprint, increase the statistics collection interval using the collect_statistics_interval key:

# sets the interval to 60 seconds
collect_statistics_interval = 60000

The default is 5 seconds (5000 milliseconds).

Increasing the interval value to 30-60s will reduce CPU footprint and peak memory consumption. This comes with a downside: with the value in the example above, metrics of said entities will refresh every 60 seconds.

This can be perfectly reasonable in an externally monitored production system but will make management UI less convenient to use for operators.

Limiting Number of Channels on a Connection ​

Channels also consume RAM. By optimising how many channels applications use, that amount can be decreased. It is possible to cap the max number of channels on a connection using the channel_max configuration setting:

channel_max = 16

Note that some libraries and tools that build on top of RabbitMQ clients may implicitly require a certain number of channels. Values above 200 are rarely necessary. Finding an optimal value is usually a matter of trial and error.

Nagle's Algorithm ("nodelay") ​

Turning off Nagle's algorithm is primarily useful for reducing latency but can also improve throughput.

kernel.inet_default_connect_options and kernel.inet_default_listen_options must include {nodelay, true} to turn off Nagle's algorithm for inter-node connections.

When configuring sockets that serve client connections, tcp_listen_options must include the same option. This is the default.

The following example demonstrates that. First, rabbitmq.conf :

tcp_listen_options.backlog = 4096
tcp_listen_options.nodelay = true

which should be used together with the following bits in the advanced config file :

[
  {kernel, [
    {inet_default_connect_options, [{nodelay, true}]},
    {inet_default_listen_options,  [{nodelay, true}]}
  ]}].

When using the classic config format , everything is configured in a single file:

[
  {kernel, [
    {inet_default_connect_options, [{nodelay, true}]},
    {inet_default_listen_options,  [{nodelay, true}]}
  ]},
  {rabbit, [
    {tcp_listen_options, [
                          {backlog,       4096},
                          {nodelay,       true},
                          {linger,        {true,0}},
                          {exit_on_close, false}
                         ]}
  ]}
].

Erlang VM I/O Thread Pool Tuning ​

Adequate Erlang VM I/O thread pool size is also important when tuning for a large number of concurrent connections. See the section above.

Connection Backlog ​

With a low number of clients, new connection rate is very unevenly distributed but is also small enough to not make much difference. When the number reaches tens of thousands or more, it is important to make sure that the server can accept inbound connections. Unaccepted TCP connections are put into a queue with bounded length. This length has to be sufficient to account for peak load hours and possible spikes, for instance, when many clients disconnect due to a network interruption or choose to reconnect. This is configured using the tcp_listen_options.backlog option:

tcp_listen_options.backlog = 4096
tcp_listen_options.nodelay = true

In the classic config format :

[
  {rabbit, [
    {tcp_listen_options, [
                          {backlog,       4096},
                          {nodelay,       true},
                          {linger,        {true, 0}},
                          {exit_on_close, false}
                         ]}
  ]}
].

Default value is 128. When pending connection queue length grows beyond this value, connections will be rejected by the operating system. See also net.core.somaxconn in the kernel tuning section.

Dealing with High Connection Churn ​

Why is High Connection Churn Problematic? ​

Workloads with high connection churn (a high rate of connections being opened and closed) will require TCP setting tuning to avoid exhaustion of certain resources: max number of file handles, Erlang processes on RabbitMQ nodes, kernel's ephemeral port range (for hosts that open a lot of connections, including Federation links and Shovel connections), and others. Nodes that are exhausted of those resources won't be able to accept new connections , which will negatively affect overall system availability.

Due to a combination of certain TCP features and defaults of most modern Linux distributions, closed connections can be detected after a prolonged period of time. This is covered in the heartbeats guide . This can be one contributing factor to connection build-up. Another is the TIME_WAIT TCP connection state. The state primarily exists to make sure that retransmitted segments from closed connections won't "reappear" on a different (newer) connection with the same client host and port. Depending on the OS and TCP stack configuration connections can spend minutes in this state, which on a busy system is guaranteed to lead to a connection build-up.

See Coping with the TCP TIME_WAIT connections on busy servers for details.

TCP stack configuration can reduce peak number of connection in closing states and avoid resource exhaustion, in turn allowing nodes to accept new connections at all times.

High connection churn can also mean developer mistakes or incorrect assumptions about how the messaging protocols supported by RabbitMQ are meant to be used. All supported protocols assume long lived connections. Applications that open and almost immediately close connections unnecessarily waste resources (network bandwidth, CPU, RAM) and contribute to the problem described in this section.

Inspecting Connections and Gathering Evidence ​

If a node fails to accept connections it is important to first gather data (metrics, evidence) to determine the state of the system and the limiting factor (exhausted resource). Tools such as netstat , ss , lsof can be used to inspect TCP connections of a node. See Troubleshooting Networking for examples.

The Role of TCP Keepalives ​

While heartbeats are sufficient for detecting defunct connections, they are not going to be sufficient in high connection churn scenarios. In those cases heartbeats should be combined with TCP keepalives to speed up disconnected client detection.

Reducing Amount of Time Spent in TIME_WAIT ​

TCP stack tuning can also reduce the amount of time connections spend in the TIME_WAIT state. The net.ipv4.tcp_fin_timeout setting specifically can help here:

net.ipv4.tcp_fin_timeout = 30

Note that like other settings prefixed with net.ipv4. , this one applies to both IPv4 and IPv6 connections despite the name.

If inbound connections (from clients, plugins, CLI tools and so on) do not rely on NAT, net.ipv4.tcp_tw_reuse can be set to 1 (enabled) to allow the kernel to reuse sockets in the TIME_WAIT state for outgoing connections. This setting can be applied on client hosts or intermediaries such as proxies and load balancers. Note that if NAT is used the setting is not safe and can lead to hard to track down issues.

The settings above generally should be combined with reduced TCP keepalive values, for example:

net.ipv4.tcp_fin_timeout = 30

net.ipv4.tcp_keepalive_time=30
net.ipv4.tcp_keepalive_intvl=10
net.ipv4.tcp_keepalive_probes=4

net.ipv4.tcp_tw_reuse = 1

OS Level Tuning ​

Operating system settings can affect operation of RabbitMQ. Some are directly related to networking (e.g. TCP settings), others affect TCP sockets as well as other things (e.g. open file handles limit).

Understanding these limits is important, as they may change depending on the workload.

A few important configurable kernel options include (note that despite option names they are effective for both IPv4 and IPv6 connections):

Note that default values for these vary between Linux kernel releases and distributions. Using a recent kernel version (such as 6.x or later) is recommended.

Kernel parameter tuning differs from OS to OS. This guide focuses on Linux. To configure a kernel parameter interactively, use sysctl -w (requires superuser privileges), for example:

sysctl -w fs.file-max 200000

To make the changes permanent (stick between reboots), they need to be added to /etc/sysctl.conf . See sysctl(8) and sysctl.conf(5) for more details.

TCP stack tuning is a broad topic that is covered in much detail elsewhere:

TCP Socket Options ​

Common Options ​

Defaults ​

Below is the default TCP socket option configuration used by RabbitMQ:

Heartbeats ​

Some protocols supported by RabbitMQ, including AMQP 0-9-1, support heartbeats , a way to detect dead TCP peers quicker. Please refer to the Heartbeats guide for more information.

Net Tick Time ​

Heartbeats are used to detect peer or connection failure between clients and RabbitMQ nodes. net_ticktime serves the same purpose but for cluster node communication. Values lower than 5 (seconds) may result in false positive and are not recommended.

TCP Keepalives ​

TCP contains a mechanism similar in purpose to the heartbeat (a.k.a. keepalive) one in messaging protocols and net tick timeout covered above: TCP keepalives. Due to inadequate defaults, TCP keepalives often don't work the way they are supposed to: it takes a very long time (say, an hour or more) to detect a dead peer. However, with tuning they can serve the same purpose as heartbeats and clean up stale TCP connections e.g. with clients that opted to not use heartbeats, intentionally or

Below is an example sysctl configuration for TCP keepalives that considers TCP connections dead or unreachable after 70 seconds (4 attempts every 10 seconds after connection idle for 30 seconds):

net.ipv4.tcp_keepalive_time=30
net.ipv4.tcp_keepalive_intvl=10
net.ipv4.tcp_keepalive_probes=4

TCP keepalives can be a useful additional defense mechanism in environments where RabbitMQ operator has no control over application settings or client libraries used.

Connection Handshake Timeout ​

RabbitMQ has a timeout for connection handshake, 10 seconds by default. When clients run in heavily constrained environments, it may be necessary to increase the timeout. This can be done via the rabbit.handshake_timeout (in milliseconds):

handshake_timeout = 20000

It should be pointed out that this is only necessary with very constrained clients and networks. Handshake timeouts in other circumstances indicate a problem elsewhere.

TLS (SSL) Handshake ​

If TLS/SSL is enabled, it may be necessary to increase also the TLS/SSL handshake timeout. This can be done via the rabbit.ssl_handshake_timeout (in milliseconds):

ssl_handshake_timeout = 10000

Hostname Resolution and DNS ​

In many cases, RabbitMQ relies on the Erlang runtime for inter-node communication (including tools such as rabbitmqctl , rabbitmq-plugins , etc). Client libraries also perform hostname resolution when connecting to RabbitMQ nodes. This section briefly covers most common issues associated with that.

Performed by Client Libraries ​

If a client library is configured to connect to a hostname, it performs hostname resolution. Depending on DNS and local resolver ( /etc/hosts and similar) configuration, this can take some time. Incorrect configuration may lead to resolution timeouts, e.g. when trying to resolve a local hostname such as my-dev-machine , over DNS. As a result, client connections can take a long time (from tens of seconds to a few minutes).

Short and Fully-qualified RabbitMQ Node Names ​

RabbitMQ relies on the Erlang runtime for inter-node communication. Erlang nodes include a hostname, either short ( rmq1 ) or fully-qualified ( rmq1.dev.megacorp.local ). Mixing short and fully-qualified hostnames is not allowed by the runtime. Every node in a cluster must be able to resolve every other node's hostname, short or fully-qualified.

By default RabbitMQ will use short hostnames. Set the RABBITMQ_USE_LONGNAME environment variable to make RabbitMQ nodes use fully-qualified names, e.g. rmq1.dev.megacorp.local .

Reverse DNS Lookups ​

If the reverse_dns_lookups configuration option is set to true , RabbitMQ will complete reverse DNS lookups for client IP addresses and list hostnames in connection information (e.g. in the Management UI ).

Reverse DNS lookups can potentially take a long time if node's hostname resolution is not optimally configured. This can increase latency when accepting client connections.

To explicitly activate or turn on reverse DNS lookups:

reverse_dns_lookups = true

To deactivate reverse DNS lookups:

reverse_dns_lookups = false

Verify Hostname Resolution ​

Since hostname resolution is a prerequisite for successful inter-node communication , starting with RabbitMQ 3.8.6 , CLI tools provide two commands that help verify that hostname resolution on a node works as expected. The commands are not meant to replace dig and other specialised DNS tools but rather provide a way to perform most basic checks while taking Erlang runtime hostname resolver features into account.

The first command is rabbitmq-diagnostics resolve_hostname :

# resolves node2.cluster.local.svc to IPv6 addresses on node [email protected]
rabbitmq-diagnostics resolve_hostname node2.cluster.local.svc --address-family IPv6 -n [email protected]

# makes local CLI tool resolve node2.cluster.local.svc to IPv4 addresses
rabbitmq-diagnostics resolve_hostname node2.cluster.local.svc --address-family IPv4 --offline

The second one is rabbitmq-diagnostics resolver_info :

rabbitmq-diagnostics resolver_info

It will report key resolver settings such as the lookup order (whether CLI tools should prefer the OS resolver, inetrc file, and so on) as well as inetrc hostname entries, if any:

Runtime Hostname Resolver (inetrc) Settings

Lookup order: native
Hosts file: /etc/hosts
Resolver conf file: /etc/resolv.conf
Cache size:

inetrc File Host Entries

(none)

Connection Event Logging ​

See Connection Lifecycle Events in the logging guide.

Troubleshooting Network Connectivity ​

A methodology for troubleshooting of networking-related issues is covered in a separate guide.

MacOS Application Firewall ​

On MacOS systems with Application Firewall enabled, Erlang runtime processes must be allowed to bind to ports and accept connections. Without this, RabbitMQ nodes won't be able to bind to their ports and will fail to start.

A list of blocked applications can be seen under Security and Privacy => Firewall in system settings.

To "unblock" a command line tool, use sudo /usr/libexec/ApplicationFirewall/socketfilterfw . The examples below assume that Erlang is installed under /usr/local/Cellar/erlang/{version} , used by the Homebrew Erlang formula:

# allow CLI tools and shell to bind to ports and accept inbound connections
sudo /usr/libexec/ApplicationFirewall/socketfilterfw --add /usr/local/Cellar/erlang/{version}/lib/erlang/bin/erl
sudo /usr/libexec/ApplicationFirewall/socketfilterfw --unblockapp /usr/local/Cellar/erlang/{version}/lib/erlang/bin/erl